DRIVE 3 PHASE MOTOR
WITH 1 PHASE 220V
1 phase motors with larger size and lower efficiency than 3 phase motors usually have centrifugal switches and semi-enclosed type, which cause a lot of toubles.A device that can solve this problem is a D.P.S (Digital Phase Converter) which enables 3 phase motors to be driven with 1 phase power (220V). 
FEATURES
◆ Drive 3 Phase motor with 1 phase◆ The failure rate was even lower frequency operation
◆ Excellent start-up torque
◆ The size is small & easy to install
◆ Semi-permanent life time
◆ Energy saving effect
◆ Stable in humid, dust, vibration and impact
◆ 3 phase motors can be used at your home.
※ FEATURES OF 3 PHASE MOTOR
Compared with 1 Phase Motor
◆ Low failure rate ◆ Small size ◆ High efficiency ◆ Affordable price
NOTICES
◆ This product shall be used only for 3 phase 220V motor.◆ Use only a motor which suits the capacity range of this product.(1:1)
◆ If the motor overheats, check whether the current is correct as shown on the motor nameplate.(Within 85% of rated)
◆ Only DPS check the voltage is the output voltage 2 phase and the output voltage 3 phase when the motors movable.
◆ If you use a motor for a large load condition, use the D.P.S product with one rating higher. Do not use it with higher than one rating.(This may cause motor failure.)
◆ Motor brake must be of sing phase only (A brake for 3 phase does not work.)
◆ For control cables, use U.W cable only(Electromagnetic switches, brake, magnet, etc.)
SPECIFICATIONS
◆ APPLICATION RANGE : 3 phase 220V motor type◆ RATED VOLTAGE : 3 phase 220V ± 10%
◆ HOW TO CONVERT : Relay control circuit for three-phase driving
◆ AMBIENT TEMPERATURE : -10~50℃
◆ AMBIENT HUMIDITY : Within 95%
◆ ENCLOSURE : Open type(IP54)
◆ INSULATION RESISTANCE : 100MΩ or higher based on 500VDC MEGA
◆ WITHSTANDING VOLTAGE : For 1minute at 1500VAC 50/60Hz between power supply terminal and external terminal
◆ POWER CONSUMPTION : Within 85% of motor rated current
You can find it!
www.everywayworld.com
